splash pads

ARE WE BUBBLE WRAPPING KIDS WITH SAFETY SURFACING IN AQUATICS?

Many adults today remember childhoods full of hot metal slides baking in the sun, sky-high monkey bars with rough concrete beneath them, and swings that soared above a seemingly endless expanse of worn grass. Today, you look around at playgrounds and see brightly colored plastic slides surrounded by sand, complex multi-level play structures with spongy surfaces waiting below, and zip lines with impact absorbing platforms on either side.

Photo Credit: Click Americana, Vintage and Retro Memories | 1900’s

Photo Credit: Click Americana, Vintage and Retro Memories | 1900’s

Photo Credit: Landscape Structures | 2017

Photo Credit: Landscape Structures | 2017

Seeing all of these cushioned corners and safety rails, the question lurks at the back of our minds, “Are we bubble wrapping kids?”

Now contrast that playful imagery of modern playgrounds with abrasive, injury-prone concrete surfaces that coat many splash pads and pool decks still today.

ARE WE BUBBLE WRAPPING KIDS WITH SAFETY SURFACING IN AQUATICS?

Consider the playground example: for decades playgrounds had no safety surfacing and as a result kids were injured often. Then wood chips, rubberized surfaces, sand, and other cushioned materials were introduced in an effort to promote play while mitigating injuries. The result was an environment that promotes play, reduces liability, and limits the number of serious play-related injuries.

Splash pads are essentially playgrounds with water, so why wouldn’t we treat them the same way?

When water is combined with concrete surfacing on splash pads, hydroplaning occurs and results in slip and fall accidents. These accidents typically involve concussions, road rash, and other major play-halting injuries due to the unsafe risks associated with concrete surfacing.

TYPES OF RISK

You may ask, “But isn’t it good for kids to learn how to handle risk and learn how to fall properly?”

We completely agree that learning how to fall is important, but injuries that halt play because of a concussion or broken limb are not acceptable. These injuries are avoidable, costly, and can have lasting negative implications. Simply put, there’s bad risk and there’s good risk. 

Bad risk is also known as a hazard and involves things that can cause harm to an individual such as sharp edges, hot surfaces, and hard impacts (1). This kind of risk does not allow for children to grow and learn positively - it often causes aversion to the source and triggers fear responses. Young toddlers are inherently clumsy and do not yet have full motor control of their limbs. When this clumsiness is paired with their inability to reason and determine dangerous situations, injuries can feel more terrifying and out-of-control. Often, when a child is injured they tend to associate the injury with their surroundings instead of the specific thing that hurt them which causes aversion to an environment (2).

Good risk is often associated with what we call ‘risky play.’ Risky play can appear in many different forms based on age, motor skills, and ability. Some types of risky play include (3): 

  • Play with High Speed

  • Rough and Tumble Play

  • Play Near Dangerous Elements (Water)

Splash pads that feature concrete surfacing inhibit children from engaging in some of these types of risky play. When a surface is slip-resistant and cushioned instead, the opportunities for engaging a greater range of activities and types of risky play are more available. Children are able to run, hop, crawl, cartwheel, tumble, and move freely around a zone of water play in more ways than if safety surfacing wasn’t included on the splash pad. 

Risky Play adds Play Value

Like we said, kids are inherently clumsy and they will trip over their own feet and fall. However, when they do fall, our mission at Life Floor is to ensure they get right back up and continue imagining, learning, and creating their own world of risky play instead of getting injured and ending their day of family fun. 

NSF International agrees that splash pads need safety surfacing. In 2019 they passed NSF/ANSI/CAN Standard 50:26 outlining criteria for safety surfacing products which include slip-resistance and cushioning. They recognize that similar safety parameters are needed in comparison to dry playgrounds.

We don’t want kids to feel averse to aquatic facilities especially as they're first introduced to aquatics and water; we want to enable them to positively play, explore, and learn through these new experiences. 

NSF/ANSI/CAN Standard 50:26

SO TO ANSWER THE BURNING QUESTION:

No, we aren’t bubble wrapping kids with safety surfacing. We’re enabling risky play and we’re helping them avoid unnecessary hazards until they’re old enough to understand them. 

Let’s let them explore, run, jump, and play freely instead of telling them to walk slow and mind the slippery concrete in an effort to try and stay safe.

If you would like to continue the conversation, please email us at solutions@lifefloor.com to share your ideas.



Sources:

1. Ken Kutska | Executive Director of the International Playground Safety Institute | Past president of NRPA | Chair of the ASTM F15.29 Subcommittee for performance requirements for public play equipment.

2. https://www.psychologytoday.com/us/blog/think-act-be/201609/21-common-reactions-trauma

3. Source: Sandsetter, Ellen Beate Hansen (2009): "Characteristics of Risky Play". Journal of Adventure Education & Outdoor Learning. 9:1, 3-21.

Creating Custom Shapes, Logos, and Designs with Life Floor Tiles

Creating Custom Shapes, Logos, and Designs with Life Floor Tiles

Splashaway Bay at CocoCay. Photo credit: Royal Caribbean

Did you know that despite being manufactured primarily as geometric tiles, Life Floor can be custom cut into any shape imaginable? From curvy designs to themed imagery and from games to giant logos, we’ve done it! Read more to learn about some of these popular design options that stray from our standard offerings to offer a more customized experience. 

Creating Custom Shapes, Logos, and Designs with Life Floor Tiles
Creating Custom Shapes, Logos, and Designs with Life Floor Tiles

For theming opportunities, we’ve cut anything from life-sized surfboards to giant paw prints and sandy islands into our floors. 

Captain Jill’s Galleon at CocoCay. Photo credit: Royal Caribbean

Captain Jill’s Galleon at CocoCay.
Photo credit: Royal Caribbean

ULTIQA Beach Haven Resort, Australia

Beach Haven, Australia

Curvy or circular designs are a popular choice for customers looking for a more organic look. 

Creating Custom Shapes, Logos, and Designs with Life Floor Tiles
Creating Custom Shapes, Logos, and Designs with Life Floor Tiles

For added play value at the surface level, we’ve created games to add to the guest experience for our customers as well. 

Creating Custom Shapes, Logos, and Designs with Life Floor Tiles
Creating Custom Shapes, Logos, and Designs with Life Floor Tiles

One of our most popular requests is to add elements of branding to surfaces - from giant logos to inlays that represent the facilities where they’re installed. 

As you can see, the opportunities and options are truly endless!


So how do we do it? 

The process varies by project. In some cases, like in the instance of giant circles, organic shapes can be hand cut on site by a skilled installation team. Large swooping curves can often be achieved this way as well.

Creating Custom Shapes, Logos, and Designs with Life Floor Tiles
Westfield Diagram

In other cases, projects come factory cut with labeled parts and diagrams to streamline the install process on site and to ensure design accuracy. 


Why don’t all customers take this approach? 

Creating Custom Shapes, Logos, and Designs with Life Floor Tiles

These designs are all amazing and we love that we’re able to create them! Unfortunately, some of these examples are out of budget for some customers. When dealing with curvy or custom designs, more material is needed to account for the amount of scrap created when trimming our square tiles to create these shapes. Installation costs are a bit higher as well due to the attention to detail needed to get the designs installed properly. 


Is there a more budget-friendly way to custom cut designs? 

Of course! In some cases, customers have opted for a repeatable inlay that can be cut from a single tile to help brand or theme their space. A great example of this is the maple leaf inlay we created for the Maple Grove Community Center

Creating Custom Shapes, Logos, and Designs with Life Floor Tiles

In other cases, a custom design only covers a small portion of a project while the rest of the design sticks with some of our more budget-friendly design options like our preferred colors or standard tile shapes. At the Courtyard by Marriott Anaheim, a few custom inlays and activities were interspersed throughout our simple pattern of square tiles in our High Tide theme

Creating Custom Shapes, Logos, and Designs with Life Floor Tiles

Another great way to incorporate a curved design is to limit the amount of tiles that need to be trimmed into a custom shape. At the splash pad at the Australia Zoo, only the perimeter of the “pond” needed to be cut while all other tiles could be installed as full square pieces.

Creating Custom Shapes, Logos, and Designs with Life Floor Tiles

While these projects all take a little extra effort during the design, manufacturing, and installation processes, we always love the results! Have an idea in mind that you’d like to explore with our team? Reach out to us and we’ll do our best to make it a reality!